Keyboard Screen Operations; Menu Delegation Function - Panasonic AV-HS410N Operating Instructions Manual

2. Preparations

2-2-2. Keyboard screen operations

When a name such as the name of the input signal material,
name of the memory or name of the data to be saved on an
memory card is to be changed, display the keyboard screen,
and input the characters.
When the rotary encoder [F2] to [F5] that corresponds to the
item (character input box) whose name is to be changed is
pressed, the keyboard screen appears on the built‑in display.
Character input area
When the keyboard screen is displayed, use rotary encoders
[F1] to [F5] to input the characters (alphanumerics and
symbols).
[F1]: CURSOR
Turn [F1] to move the cursor inside the character input
area.
[F2]: UP/DOWN, [F3]: LEFT/RIGHT
When selecting characters on the keyboard, turn [F2] to
move up or down, or turn [F3] to move to the left or right.
When [F2] or [F3] is then pressed, the character selected
is entered.
The character selected is reflected in the character input
area.
Shift
 When is selected and pressed, the keyboard
display is switched (between upper‑case letters, lower‑
case letters and symbols).
[F4]: OK
When [F4] is pressed, the name which has been input is
entered, and reflected in the unit.
At this point, the keyboard screen is cleared, and the
original screen is restored.
[F5]: CANCEL
When [F5] is pressed, the name which has been input is
canceled.
At this point, the keyboard screen is cleared, and the
original screen is restored.

2-2-3. Menu delegation function

When the buttons listed below are double‑clicked, the
specified menu is selected. (The menu delegation function)
The operation corresponding to the button pressed is also
executed.
Button
Crosspoint area (AUX bus selector buttons)
KEY Key menu/Adjust sub menu
When the chroma key is selected:
Chroma Key menu/Adjust sub menu
PinP1 PinP1 menu/Position sub menu
PinP2 PinP2 menu/Position sub menu
DSK DSK menu/Adjust sub menu
Transition area
BKGD Time menu/BKGD sub menu
KEY Time menu/Key sub menu
WIPE Background menu/Border sub menu
<Menu delegation setting>
This setting is used to enable (turn on) or disable (turn off) the
menu delegation function.
1 Press the s button to light its indicator, and display the
Config menu.
2 Use [F1] to display the Operate sub menu.
3 Use [F5] to set enable or disable for the menu
delegation function at the Delegation item.
On
Enable
Off Disable
31
Menu selected