Basic Operations; Background Transition; Selecting The Bus; Selecting The Bus Using The Shift Function - Panasonic AV-HS410N Operating Instructions Manual

1. Basic operations

1-1. Background transition

1-1-1. Selecting the bus

Press one of the crosspoint buttons to select the material to
be used for the background transition.
Depending on the operating status, the button pressed will
light in one of two colors.
Lighting in When the selected input signals are output to
red PGM.
(However, the indicator lights in amber during
FTB operations.)
Lighting in When the selected input signals are not output
green to PGM.
AUX BUS DELEGATION
AUX
PGM
A
1/13 2/14 3/15 4/16 5/17
PST
B
p  When the crosspoint buttons are held down, the button
numbers and the names of the input materials assigned to
the buttons are displayed on the built-in display in the form
of a list for as long as the crosspoint buttons remain held
down.
CROSS POINT ASSIGN
XPT:
1 2 3 4 5
SIG:
BLK IN1 IN2 IN3 IN4
XPT:
13 14 15 16 17
SIG:
A2 B1 B2 CBAR CBD1
AUX/DISP SOURCE
6/18 7/19 8/20 9/21 10/22 11/23
Lighting in red
Lighting in green
6 7 8 9 10 11 12
IN5 IN6 IN7 IN8 DVI A1 SHIFT
18 19 20 21 22 23 24
ST1V ST2V None KOUT CLN None SHIFT
1-1-2. Selecting the bus using the SHIFT
function
The SHIFT function enables two materials to be allocated —
the front material and the rear material — to one button, and
the materials to be selected using the [SHIFT] button.
A total of 24 materials — front materials (1 to 12) and rear
materials (13 to 24) — can be allocated to the three groups of
12 crosspoint buttons whether these buttons are the PGM/A
bus crosspoint buttons, PST/B bus crosspoint buttons or AUX
bus crosspoint buttons.
There are actually two SHIFT functions: "All SHIFT" for
switching all the front materials to the rear materials or vice
versa, and "Single SHIFT" for switching the front material of
one crosspoint button with its rear material or vice versa.
"All SHIFT" works once the SHIFT function has been
SHIFT
allocated to one of the user buttons.
"Single SHIFT" works once the SHIFT function has been
SHIFT
allocated to the No.12 or No.1 crosspoint button of the
12/24 crosspoint button group concerned by a menu operation.
SHIFT
All SHIFT
All SHIFT is used to switch all the materials of the PGM/A bus
crosspoint buttons, PST/B bus crosspoint buttons or AUX bus
crosspoint buttons from front materials to rear materials or
vice versa.
The user button to which the SHIFT function has been
allocated is used to switch between the front materials and
rear materials.
1 Allocate the SHIFT function to one of the user buttons.
(For the method used to allocate this function to the
user button, refer to "3-3-1. Setting the user buttons".)
2 Each time the [SHIFT] button (user button) is pressed,
the front materials are switched to the rear materials or
vice versa.
 When the rear materials (13 to 24) have been selected,
the [SHIFT] button (user button) lights in amber.
 When the button is pressed again, it goes off, and the
front materials (1 to 12) are now selected.
6