Setting The Gpi - Panasonic AV-HS450N Operating Instructions Manual

5. System settings

5-7-3. Setting the GPI

The user can set the functions that are to be controlled from the GPI ports and set whether to enable the control.
 Refer to "6-2-4. TALLY/GPI" and "6-3-1. TALLY/GPI".
 Press the [CONFIG] button to light its indicator and display the CONFIG menu.
 Refer to "2-1-5. LCD menu area".
 Turn [F1] to display the sub menu corresponding to the TALLY/GPI connector concerned and set the function
to be controlled by the GPI port.
TALLY/GPI connector of mainframe:
GPIM-In sub menu and GPIM-Out sub menu
<Menu display>
CONFIG 4 | Port
GPIM-In |
Port1~8
TALLY/GPI connector of control panel:
GPIP-In sub menu and GPIP-Out sub menu
<Menu display>
CONFIG 6 | Port
GPIP-In |
Port1~8
 Turn [F2] to select the port to be controlled using the Port item.
 Turn [F3] to select the function to be assigned using the Assign item.
 Refer to "Control using the GPI input port" and "Output from the GPI output port".
 Turn [F5] to set enable or disable for the control to be exercised from each port using the GPIEN item.
Enable: Control is enabled.
Disable: Control is disabled.
 Settings for the GPIEN item can be assigned to one of the user buttons.
 See "5-3-1. Setting the user buttons".
| Assign | | GPIEN
—|NoAsign| |Disable
| Assign | | GPIEN
—|NoAsign| |Disable
CONFIG 5 | Port
GPIM-Out|
Enable
CONFIG 7 | Port
GPIP-Out|
Enable
142
| Assign |
—|NoAsign|
Port1
|
Port31
| Assign |
—|NoAsign|
Port1~8
| GPIEN
|Disable
Enable
| GPIEN
|Disable
Enable