SDI IOP Detail Status display
As shown in the following figure, the unique portion of the Serial Device Interface IOP Detail Status
display consists of a single target. Its purpose is the same as the Smart Transmitter Interface IOP Detail
Status display.
The LINE FREQUENCY target permits selection of 50 HZ or 60 HZ operation. The selection is
identified by reverse video.
SI IOP Detail Status Display
Unique display information
Some of the information provided by an IOP Detail Status display is unique for the type of IOP. The
definitions that follow provide information that is unique to the SI IOP Detail Status display.
R688
December 2020
Figure 176 Serial Device Interface IOP Detail Status Display
HPM High-Performance Process Manager Service
Honeywell
3 UCN Status Displays
3.8 IOP Detail Status Displays
295