Fta Fuse Protection; Figure 49 Iop Only Card File Backpanel Fuse Locations - Honeywell HPM Service

FTA fuse protection

Some individual FTAs may have fuse protection on the assembly. In general, output type FTAs are
fused, but not exclusively. Fuse information for the individual FTAs can be found in the Process
Manager I/O Installation manual.
R688
December 2020

Figure 49 IOP Only Card File Backpanel Fuse Locations

HPM High-Performance Process Manager Service
Honeywell
2 Equipment Description
2.20 24 Vdc Fuse Protection
117