30 Series Network Video Recorder User Guide
Setting-Event-Event
The events reported from individual cameras' alarm in /alarm out, and motion detection can
be accommodated in the NVR system's alarm settings. These events will then be reported or
trigger corresponding actions as follows:
•
Record the video by the time the event is triggered.
•
Reporting events via Email with snapshots attached.
•
Sound the onboard buzzer.
•
Triggering video snapshot and text message by the occurrences of events to an FTP site.
•
Triggering a camera's alarm out.
•
Triggering a PTZ camera(s) for its lens to move to a preset position.
•
Sending notification to the HVMV for MS Window software.
•
Sending a full screen live view on the connected monitor.
When an alarm is triggered, a message prompt will appear on the Liveview or any
configuration window.
Figure 6-18 Event
Creating an Event
Go to
1. Click
Figure 6-19 Create a New Event-Status
44
Event.
and the following window is displayed: