Ehpm Front Panel Led Display Information - Honeywell HPM Service

Experion network, the firmware can be upgraded from a standalone PC loaded with EUCN Tools.
Firmware and instructions to update the firmware are provided with the Utilities & Load Modules media.
Figure 5.4 Enhanced High-Performance Comm/Control Card (Front Panel)

EHPM Front Panel LED display information

EHPM Front Panel
LED display
AUTH
BRN
DUP
R688
December 2020
Table 2.2 EHPM Front Panel display indications
Indicates...
ENIM failed to authenticate EHPM.
Firmware load in progress.
EHPM either has a duplicate FTE
Device Index, or duplicate PdTag, or
both duplicate FTE Device Index and
HPM High-Performance Process Manager Service
Honeywell
2 Equipment Description
2.6 EHPM Card Files
Recovery action
Check $FTESTS2 schematic details
for the AUTH GROUP. There might
be a duplicate BOOTP server on the
network. Manual failover to backup
ENIM may be necessary.
Wait for firmware load to complete.
Identify the duplicate problem in the
FTE Community (using $FTESTS2
schematic or PC's FTE Status
51