I/O Link Extender (Fiber Optic Link); Introduction; See The Following Figures - Honeywell HPM Service

2.12 I/O Link Extender (Fiber Optic Link)

Introduction

The I/O Link Extender provides the ability to locate 7-Slot and 15-Slot IOP card files and associated
FTAs up to 8 kilometers (5 miles) from the HPMM(s). Two types of I/O Link Extenders and their
associated fiber Optical Coupler Modules are available, the "Standard" I/O Link Extender which
provides up to a 1.3 kilometers (4000 feet) link, and the "Long Distance" I/O Link Extender which
provides up to an 8 kilometers (5 miles) link. The connection is made using a pair of fiber optic
transmission cables, driven and terminated by a fiber Optical Coupler Module that mates with the
connector located directly below the card file slot in which the I/O Link Extender card is installed.

See the following figures


Figure 13 Standard I/O Link Extender Interconnections with Nonredundant HPMM

Figure 14 Standard I/O Link Extender Interconnections with Redundant HPMMs

Figure 15 Long Distance I/O Link Extender Interconnections with Nonredundant HPMM

Figure 19 Long Distance I/O Link Extender Interconnections with Redundant HPMMs
R688
December 2020
HPM High-Performance Process Manager Service
Honeywell
2 Equipment Description
2.12 I/O Link Extender (Fiber Optic Link)
69