Secondary Hpmm Status; Table 25 Ucn Status Display - Secondary Hpmm Status - Honeywell HPM Service

OFFNET
(Text color – red)
PARTFAIL
(Text color – red)
PF_IDLE
(Text color – red)
PF_IOIDL
(Text color – red)

Secondary HPMM status

The possible status of the secondary HPMM is defined in the following table with the color of the text
indicated.
BACKUP
(Text color – blue)
BKUP_SF
(Text color – blue)
ALIVE
(Text color – yellow)
BACKUP
(Text color – yellow)
BKUP_SF
(Text color – yellow)
R688
December 2020
Term
The HPM is not responding on the UCN because 1) it
does not exist, 2) power is off, or 3) there is a
hardware failure that prohibits a response.
There are one or more Partial failures.
There are one or more Partial failures and the HPMM
is in the Idle state.
There are one or more Partial failures, and at least
one IOP is in the Idle state.
Table 25 UCN Status Display – Secondary HPMM Status
Term
Processing is in progress and the secondary HPMM
database is synchronized with the primary HPMM
database.
The HPMM is in the Run state, but has a Soft
failure.
Power is present, but no database or personality
program is loaded.
The secondary HPMM is in the Idle state, or its
database is not synchronized with the primary
HPMM.
The HPMM is in the Idle state, but has a Soft failure.
HPM High-Performance Process Manager Service
Definition
Definition
Honeywell
3 UCN Status Displays
3.4 Display Operation
193