Camera Presets In A Call; Near End Camera Control; Far End Camera Control - Cisco TelePresence Series User Manual

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300
Table of Contents

Camera presets in a call

There may be camera presets stored on your system.
If so, these are available at all times during a call. How
to define camera presets is described in
camera preset on page 8. Do as follows:
1. Tap the camera icon, as outlined:
2. Select the preset required, as outlined:
D14582.09 User guide Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. Version TC6.0, 01.2013
Getting started Video meetings

Near end camera control

You may control your own camera manually at all
times during a call. Your own camera is often referred
Adding a to as the near end camera. Do as follows:
1. Tap the camera icon, as outlined:
2. Tap Show camera controls, as outlined:
3. Adjust as needed (a) and tap Hide camera controls (b)
4. Tap anywhere outside the menu to exit.
Scheduled meetings

Far end camera control

If the other participants are on systems with adjustable
cameras, you may be able to control the pan and zoom
of their camera. Do as follows:
1. Tap as outlined. If you are in a call with more than
2. Then tap Camera Control.
3. Adjust pan and zoom as required:
4. Tap anywhere outside the menu to exit.
22
Managing Contacts The Settings
one (a conference), tap the one whose camera you
want to adjust.
User guide
www.cisco.com