Laser Safety; Led Safety - Datalogic Matrix 320 Product Reference Manual

COMPLIANCE

LASER SAFETY

This product conforms to the applicable requirements of IEC 60825-1 and complies with
21 CFR 1040.10 except for deviations pursuant to Laser Notice N° 56, date May 8, 2019.
This product is classified as a Class 2 laser product according to IEC 60825-1 regulations.
CAUTION
Disconnect the power supply when opening the device during maintenance or installa-
tion to avoid exposure to hazardous laser light. The laser beam can be switched on or
off through a software command.
The following warning label content is applied to each of the laser equipped products
indicated in the General View illustration (Figure 1).
Produit(s) conforme selon 21CFR 1040.10 sauf des dérogations relatives à la Laser
Notice N° 56, du 8 Mai, 2019.
Dans le paquet il y a l'étiquette(s) pour les pays où le texte d'avertissement en français
est obligatoire. Le(s) mettre sur le produit à la place de la version anglaise.

LED SAFETY

For all Datalogic Matrix 320 compatible internal illuminators, LED emission is classified
into Risk Group 1 according to EN 62471:2010.
x
MATRIX 320
Use of controls or adjustments or performance of procedures other than
those specified herein may result in exposure to hazardous visible laser
light.
Example Laser Warning Labels
Exemple d'étiquettes d'avertissement laser