Datalogic Matrix 320 Product Reference Manual page 145

3. Now save them, overwriting the cloned application job
Figure 86 - Saving Synchronized Phase Mode Configuration to Slave
Repeat this procedure for each Slave device until the entire network is configured.
See "
ID-NET Synchronized Network" on page 90
1. An application job with the same name as the Master's has been cloned to the Slaves. Each
Slave can have its own Image Settings parameters saved in its own copy of the application job.
Common parameters managed by the Master such as Operating Mode cannot be modified in
the Slave jobs and are shown in dark gray.
INTERNAL NETWORK CONFIGURATIONS
1
.
for an example.
PRODUCT REFERENCE GUIDE
131