Datalogic Matrix 320 Product Reference Manual page 35

The large green box for each symbol indicates the code localization area
which by default is equal to the maximum FoV. It can be resized and
moved by dragging its borders with the mouse. The code must be found
NOTE
within this area in order to be decoded.
11. Add your application specific codes to the Code Settings by selecting them from
the icons over the Configuration Parameters tree area. If the Data Matrix symbol-
ogy is not used, then delete it from the Code Settings with the Delete icon.
If you don't know the code type, you can use the Code Autolearn feature by click-
ing on the Code Autolearn icon.
12. For each code symbology set the relative parameters according to your applica-
tion.
1. The Code Autolearn procedure will not recognize the following symbologies: Pharmacode, MSI,
Standard 2 of 5, Matrix 2 of 5.
STEP 6 - DEVICE CONFIGURATION
1
See the DL.CODE User's Manual for details.
PRODUCT REFERENCE GUIDE
21