The output signals are fully programmable being determined by the configured Activa-
tion/Deactivation events, Deactivation Timeout or a combination of the two. For further
details refer to the Help On Line page for the Output Setup step in DL.CODE.
For NPN output connections, the external interface voltage (Vext) must
not exceed the Matrix 320 power supply source voltage (Vdc) otherwise
correct output functioning cannot be guaranteed.
CAUTION
Figure 3 - PNP Output Connection
Figure 4 - NPN Output Connection
Figure 5 - Push-Pull Output Connection
OUTPUTS
PRODUCT REFERENCE GUIDE
169