SOFTWARE CONFIGURATION
Backup
To perform a Backup:
1. From the DL.CODE Device menu, select either Single Reader Backup (to file on
NOTE
You will be reminded that configuration in temporary memory will not be saved so you
should save the configuration to the reader before performing Backup.
If you are performing a backup to a file you will be asked whether to include the firm-
ware or not.
At the end of the backup, DL.CODE shows a message indicating successful completion.
136
MATRIX 320
PC); or Backup to external storage device.
For ID-NET network Backup, select the Backup current Internal Network
configurations selection.