Mounting the BK-32-00 Standard Fix Bracket
The package contains the following materials to mount the Standard Fix Bracket:
•
•
•
NOTE
To install the bracket on the reader, follow this procedure:
1. Insert the silver screws and silver washers through the bracket and thread them
2. Tighten the screws.
1 Standard Fix Bracket
3 silver screws
3 silver washers
Make sure that the heat sink is already installed on the reader before
mounting the bracket (refer to the Heat Sink Mounting Instructions pro-
vided in the package).
loosely into the heat sink. The bracket is provided with curved slots both on the
reader side and the frame side, which allow installing the bracket on various axes.
Figure 36 - Positioning with Standard Fix Bracket
MOUNTING AND POSITIONING MATRIX 320
PRODUCT REFERENCE GUIDE
55