RAPID CONFIGURATION
CBX100/CBX500 Pinout for Matrix 320
The table below gives the pinout of the CBX100/CBX500 terminal block connectors. Use
this pinout when the Matrix 320 reader is connected by means of the CBX100/CBX500:
GROUP LABEL
Input Power
Inputs
Outputs
Auxiliary
Interface
ID-NET™
Main
Interface
* Do not leave floating, see
CAUTION
2
MATRIX 320
Vdc
Power Supply Input Voltage +
GND
Power Supply Input Voltage -
Earth
Protection Earth Ground
+V
Power Source - External Trigger
I1A
External Trigger A (polarity insensitive)
I1B
External Trigger B (polarity insensitive)
-V
Power Reference - External Trigger
+V
Power Source - Inputs
I2A
Input 2 A (polarity insensitive)
I2B
Input 2 B (polarity insensitive)
-V
Power Reference - Inputs
+V
Power Source - Outputs
-V
Power Reference - Outputs
O1+
Output 1 +
O1-
Output 1 -
O2+
Output 2 +
O2-
Output 2 -
O3A
Output 3 - (CBX500 only)
TX
Auxiliary Interface TX
RX
Auxiliary Interface RX
SGND
Auxiliary Interface Reference
REF
Network Reference
ID+
ID-NET network data +
ID-
ID-NET network data -
RS232
RS422 Full Duplex
TX
TX+
-
TX-
RX
*RX+
-
*RX-
SGND
SGND
RS422 Full Duplex Interface" on page 65
"
Do not connect GND, SGND and REF to different (external) ground refer-
ences. GND, SGND and REF are internally connected through filtering
circuitry which can be permanently damaged if subjected to voltage
drops over 0.8 Vdc.
DESCRIPTION
for connection details.