Step 2 - Mount And Position The Reader - Datalogic Matrix 320 Product Reference Manual

STEP 2 - MOUNT AND POSITION THE READER

1. To mount the Matrix 320, use the mounting brackets to obtain the most suitable
2. When mounting the Matrix 320 take into consideration these three ideal label
No Pitch,
Tilt or Skew
3. Refer to the reading diagrams in
NOTE
position for the reader. The mounting solutions are provided in "
Positioning Matrix 320" on page 54
position angles: Pitch or Skew 10° to 20° and Tilt 0°, although the reader can read
a code at any tilt angle provided the code fits into the Field Of View (FOV).
Pitch
Minimize
Figure 4 - Pitch, Skew and Tilt Angles
and minimum distance requirements according to the base/lens combination
used for your application.
Rapid Configuration of the Matrix 320 reader can be made either through
the X-PRESS interface (steps 4-6) which requires no PC connection, or
by using the DL.CODE Configuration Program (steps 7-8). Select the pro-
cedure according to your needs.
STEP 2 - MOUNT AND POSITION THE READER
.
Tilt
any angle
inside FOV
Chapter 6, Reading Features
Mounting And
Skew
assure at least 10°
for FOV calculation
PRODUCT REFERENCE GUIDE
3