Ethernet Device Discovery - Datalogic Matrix 320 Product Reference Manual

Ethernet Device Discovery

NOTE
The User Interface opens and displays a list of all the devices belonging to the Local Area
Network. DL.CODE has a discovery feature to accomplish this task.
The discovery feature will also show devices not belonging to the LAN and display them
in gray (see Figure 10).
3. First the device must be added to the LAN by aligning its IP Address to the net-
4. Find your device in the list by matching its serial number (SN) then click on the
5. Change the Ethernet Settings (IP Address, Subnet Mask, Gateway Address etc.)
To discover models through serial communication instead of Ethernet
communication, refer to the DL.CODE User's Manual (par. "Serial Device
Discovery").
work. The network administrator should provide valid LAN address(es).
device wrench icon to open the Device Environment Configuration window.
according to the network requirements.
STEP 5 - INSTALLING DL.CODE CONFIGURATION PROGRAM
Figure 10 - Device Discovery
PRODUCT REFERENCE GUIDE
9