Output 1 And 2 Connections Using Matrix 320 Power - Datalogic Matrix 320 Product Reference Manual

OUTPUTS

Output 1 and 2 Connections Using Matrix 320 Power

Power from the Vdc/GND spring clamps is available directly to the Out-
put Device on the +V/-V spring clamps, and does not pass through the
Power Switch (ON/OFF) inside the CBX. Disconnect the power supply
CAUTION
when working inside the CBX.
Figure 62 - PNP/Open Emitter Output Using Matrix 320 Power
Figure 63 - NPN/Open Collector Output Using Matrix 320 Power
79
PRODUCT REFERENCE GUIDE