Datalogic Matrix 320 Product Reference Manual page 144

SOFTWARE CONFIGURATION
When the job opens, pause run mode and configure the Slave specific parameters.
These depend on the application and include the following:
•
•
•
•
Verify the focus and decoding with the capture image button.
130
MATRIX 320
photometric parameters (Image Auto-Setup feature in the Advanced Setup –
Image Settings step)
Acquisition Trigger Delays necessary to avoid lighting interference between adja-
cent or oppositely positioned readers (Reading Phase step)
Images Saving if used (Data Formatting step)
Encoder Sensor: if used, (for all Slaves, the Encoder Type must be set to Internal)