Datalogic Matrix 320 Product Reference Manual page 62

INTRODUCTION
Time set to 250 μs, which allows a theoretical maximum application speed of 1320 mm/
s. When HDR is enabled, the Exposure Time can be reduced to 100 μs, which allows a
theoretical maximum application speed of 3300 mm/s.
For more details on line speed and exposure time calculations, refer to "
Speed and Exposure Time Calculations" on page 95
To enable the HDR function on DL.CODE, go to Advanced Setup>Image Settings>Image
Quality>HDR Selector, then select HDR.
48
MATRIX 320
Figure 26 - Enabling HDR on DL.CODE
.
Maximum Line