Advertisement
User's Manual and Supplied Software
User's Manual and supplied software are included in the internal memory of the GLT400.
Please copy from the internal memory to the PC and use it. Refer to the next section for the
copy method.
When the internal memory is initialized, the included files are deleted. Deleting the included
files does not affect the unit operation, but it is recommended that you copy the files to your
PC in advance.
If you have deleted the User's Manual or supplied software from the internal memory, please
download them from our website.
Graphtec website: http://www.graphteccorp.com
How to copy supplied files in USB DRIVE mode
1
.
Set the Mode switch on the GLT400 to
"USB DRIVE" when the power is off.
2
.
Connect the GLT400 to the computer
using the USB cable.
Connect the AC adapter cable and then
turn on the power switch of the
GLT400.
(3) Power switch
(1) USB cable
(2) AC adapter cable
3
.
When the internal memory of the
GLT400 is recognized on the PC, it
can be accessed.
4
.
Copy the following folders and files to
the PC.
2
Advertisement
