GRAPHTEC midi LOGGER GLT400 Quick Manual Start page 5

6. POWER LED
This LED is lit in three colors: green, orange, and red. It mainly indicates the power state.
Mode Switch state
STAND-ALONE / REMOTE
USB DRIVE
7. START LED
This LED is lit in three colors: green, orange and red. It mainly indicates the capturing state.
Mode Switch state
STAND-ALONE / REMOTE
USB DRIVE
8. ALARM LED
This LED is lit in one color: red. It indicates the alarm output state.
Mode Switch state
STAND-ALONE / REMOTE
USB DRIVE
9. ACCESS LED
This LED is lit in green when reading/writing to the internal memory.
Mode Switch state
STAND-ALONE / REMOTE /
USB DRIVE
10. SD ACCESS LED
This LED is lit in one color: green. The operation varies depending on the medium
inserted in the SD CARD slot.
Mode Switch state SD CARD slot state Lighting state
STAND-ALONE /
REMOTE
USB DRIVE
Lighting state
Not lit
Flashes in green
Lit in green
Flashes in orange
Lit in red
Lit in orange
Lighting state
Not lit
Lit in orange
Lit in green
Flashes in orange
Always not lit
Lighting state
Not lit
Lit in red
Always not lit
Lighting state
Not lit
Lit in green
Not inserted Not lit
SD CARD Not lit
Flashes in green
Wireless LAN Not lit
unit option Lit in green
(B-568) Flashes in green
Not inserted Not lit
SD CARD Not lit
Lit in green
Power off state
Starting up/Reading setting file
SD CARD replaceable state (during capturing)
When the GLT400 is started
Preparing for SD CARD replacement
Error has been occurred
Operating in USB DRIVE mode
Capturing has been stopped (During free running )
Waiting for start trigger
Capturing
Capturing finished (stop trigger is established),
Waiting for repeat capturing
Not used
No alarm has occurred
Alarm has occurred (Alarm is being output.)
Not used
Not accessing (reading/writing) the internal memory
Accessing (reading/writing) the internal memory
Description
Always not lit
Not accessing (reading/writing) the SD CARD
Accessing (reading/writing) the SD CARD
Wireless LAN unit is not communicating
Wireless LAN unit is communicating
Automatic IP Address Acquisition (DHCP) is
being performed during Easy Connection (WPS)
Always not lit
Not accessing (reading/writing) the SD CARD
Accessing (reading/writing) the SD CARD
4
Description
Description
Description
Description