Bosch Rexroth ID 200/C‑PDP Manual page 58

58/84 ID 200/C-PDP web interface
Bosch Rexroth AG, MIT: ID 200, 3 842 540 399/2016-11
Install a Communications cable between two computers.
f
Take the Selected ports, in screenshot COM4, any COM ports are possible.
f
Be sure that the ID 200/C-PDP is connected to the COM port selected.
Next installs the modem on your computer
f
Click Finish to see the new entry Communications cable between two computers.
f
Now you have to change the default settings of this new modem.
Double click the entry and Change settings in the General tab.
f
There may some delay until the dialog reappears.