Bosch Rexroth ID 200/C‑PDP Manual page 42

42/84 Communication with ID 200/C-PDP
Bosch Rexroth AG, MIT: ID 200, 3 842 540 399/2016-11
The following data carrier types are supported:
Data carrier Designation
type
High Low
Byte Byte
'0' '2'
'0' '3'
'1' '0'
'1' '1'
'1' '4'
'1' '5' MDT../28-L
'2' '0' 1)
'2' '1' MDT../112-H
'2' '2'
'2' '3'
'2' '4'
'3' '3' MDT../2K-H
'3' '5'
'9' '9' depending on
antenna
1) This is not a data carrier type per se. It is used to read out the UID (fixed code) of all
ISO 15693-compliant data carriers.
2) The data carrier type set in the antenna as standard is selected.
In a system where only one data carrier type is used, it is advisable to set this
data carrier type. This means that the antenna can identify the data carrier faster.
Default data carrier type: In the condition as supplied, the data carrier type 99 is set
on the ID 200/C-PDP (depending on the antenna). This means that the data carrier
type is used, which is set on the antenna.
Recommendation: For operation in an automated system, set the data carrier type
used with a command.
Chip type
Unique, EM4102
(EM Microelectronic)
EM4450 (EM Micro-
electronic), Titan
Nova (Sokymat)
Q5 (Sokymat)
T5557 (Atmel)
Q5 (Sokymat)
all ISO 15693-compli-
ant data carriers
I-Code SLI
(NXP)
Tag-it HF-I Plus
(Texas Instruments)
my-D (Infinion)
SRF55V02P
my-D (Infinion)
SRF55V10P
Fujitsu FRAM
MB89R118
I-Code SLI-S
(NXP)
–
2)
Access Bits Fixed
code
length
(bytes)
Fixed 40 5
code
R/W 928 4
Fixed 32
code
R/W 40 –
R/W 40 –
R/W 40 –
R/W 40 –
R/W 8
Fixed
code
R/W 896 8
Fixed 64
code
R/W 2k 8
Fixed 64
code
R/W 1792 8
Fixed 64
code
R/W 7424 8
Fixed 64
code
R/W 16k 8
Fixed
code
R/W 1280 8
Fixed
code
– – –
Frequency
range
125 kHz
125 kHz
125 kHz
125 kHz
125 kHz
125 kHz
13.56 MHz
13.56 MHz
13.56 MHz
13.56 MHz
13.56 MHz
13.56 MHz
13.56 MHz
–