Siemens SIMATIC C7-613 Manual page 99

When entering values, do the following:
Step
1 Using the cursor keys, select the desired entry
field within the screen.
2
Press the SHIFT key in order to
enter the input mode.
3 Enter the appropriate value using the function
keys (K-keys). Set the sign with the "Cursor up"
or "Cursor down" keys.
4 You can make corrections with the "Cursor
left" key. This returns you to the previously
entered digit, and the lowest order position
(cursor position) of the entered value is deleted.
Now a new digit can be entered.
5 As soon as you begin with the input, you cannot
exit the respective field until you confirm or
cancel the entry.
Confirm your entry with
Cancel faulty input with
6 If you wish to continue, place the cursor (using
the cursor keys) on another entry field, and
perform the next entry as described above in
Steps 2 to 5.
Entry of Hexadecimal Numbers
Also enter hexadecimal values using the function keys (K-keys). To enter the
values A to F, respectively, enter one digit of the number using the function keys.
Then, you can use the "Cursor up" and "Cursor down" keys to select the values A
to F.
C7-613 Control System
A5E00138934-03
Action
SHIFT
ENTER
ESC
Operating the C7-613
Result
The cursor is located on the
input field.
The LED of the SHIFT key is
illuminated (SHIFT Lock).
The cursor is on the lowest
order position
Your entry is displayed in the
entry field.
The value is entered. The
entry is terminated, and the
SHIFT LED is turned off.
The original value is entered
again automatically. The entry
is terminated, and the SHIFT
LED is turned off.
5-9