Siemens SIMATIC C7-613 Manual page 77

Table 4-3 Parameters of the "HMI API" FB, continued
Parameter
RETVAL
ADDINFO
KEYS
JOB_ID
JOB_PAR1
JOB_PAR2
JOB_PAR3
C7-613 Control System
A5E00138934-03
Declaration Data Type
OUTPUT INT
OUTPUT INT
INOUT DWORD
INOUT INT
INOUT INT
INOUT INT
INOUT INT
Integration into the User Program
Memory Description
Area
M, D, L, A Return value; provides information
about possible errors and the
status of the HMI functions. The
return values are described in
Appendix B.1
M, D, L, A Supplementary information for the
return value (RETVAL). The
supplementary information is
described in Appendix B.1
M, D, L Keyboard image (refer to Section
4.5.2)
M, D, L Job compartment,
job number
(Parameter can only be specified
indirectly, refer to Section 4.5.3)
0 = Last job executed
M, D, L Job compartment
Parameter 1
(parameter can only be specified
indirectly; see Section 4.5.3)
M, D, L Job compartment
Parameter 2
(parameter can only be specified
indirectly; see Section 4.5.3)
M, D, L Job compartment
Parameter 3
(parameter can only be specified
indirectly; see Section 4.5.3)
4-21