Siemens SIMATIC C7-613 Manual page 117

Selection of Info Texts
Figure 5-10 shows how you can use the cursor keys to have one or more info texts
which you have assigned to a message displayed.
The info texts and their assignment to a specific message are specified by using
the configuration interface.
You can carry out the following at a message:
• Assign a single info text (in the figure m
• Assign several texts (in the figure m
to specify the transitions between the info texts.
The cursor keys are used to page between the info texts assigned to a message.
The ESC key is used to quit the display of the info texts and return to the
message.
<Fault > K 001/015
#003
on
Message Text No. n
Figure 5-10 Selecting Info Texts
C7-613 Control System
A5E00138934-03
1
Fault Plant1
30.04.02 17:45:04
Operating the C7-613
),
1
to m ) by using the configuration interface
n
Info text No. m
Info text No. m
ESC
Info text No. m
Configured info texts
ESC
n
2
1
5-27