Spare Parts; Machine's Scrapping; Warranty Card; Warranty Terms - SaMASZ UNO 600 Operator's Manual

SPARE PARTS

11.
In order to facilitate the process of picking appropriate spare parts, in order form please include
following data:
Machine's unit and serial number (located on the rating plate

Machine's capacity in cubic meters.

Code and description of spare parts.

Number of parts required.

Company's information needed to issue an invoice if the delivery address is different.

Cost and a way of delivery (courier package or picking it up on your own).


MACHINE'S SCRAPPING

12.
When the machine is worn out completely, it should be scrapped follwing these steps:
Machine can not be abandoned

All transmission and engine oils should be emptied and put in adequate points.

Dismantle the unit and separate reusable parts, i.e. tires, hydraulic hoses, valves, etc.

Give reusable parts to adequate offices.

Metal parts should be transported to a scrapyard.


WARRANTY CARD

13.
The product quality has been checked and meets the required standards and regulations and is
permitted for use.
NOTE:
WARRANTY CARD WITHOUT THE REQUIRED INFORMATION OR
WITH CORRECTED OR ILLEGIBLE INFORMATION – IS INVALID.

WARRANTY TERMS

14.
14.1.
1. This 12-month warranty covers malfunctions of the device caused by defects in parts or
manufacture. The warranty for 24 months can be purchased.
Operating manual
FODDER WAGON OPTIFEED

WARRANTY CLAIM PROCEDURE

Tedder wagons OptiFEED
Serial number
Date of manufacture
Manufacturer stamp
QC signature
Date of purchase
Dealer stamp
Dealer signature
25