Restarting The Machine After Repairs Or Longer Storing Periods; Lubrication Instruction - SaMASZ K2BF 210 Operator's Manual

6.3.5. Restarting the machine after repairs or longer storing periods

Make sure that all nuts and screws are tightened with correct torque (Tab. 4).

Make sure that all guards are installed in place.

As the storing period is over lubricate the whole machine.

Tab. 4. Values of bolt tightness
In the absence of specific torque values, the following chart can be used as a guide to the
maximum safe torque for a particular size and grade of fastener. There is no torque difference for
fine or coarse threads. Torque values are based on clean, dry threads. Reduce value by 10% if
threads are oiled before assembly.

7. LUBRICATION INSTRUCTION

Lubrication scheme shown in Fig. 22 mower:
Tab. 5. Amount of oil
Symbol
Operator's manual
.
Fig. 22 Lubrication points
Amount of oil [l]
5,0
1,0
Front drum mower
K2BF 210; K4BF 265; K4BF 300
Oil type
Oil Transol 680 ÷ 1000
Gear oil Transol lub Hipol
- 26 -