Dismounting Machine From Tractor; Mounting And Adjustments; Mounting And Timing Of The Knives - SaMASZ K2BF 210 Operator's Manual

5.6.

Dismounting machine from tractor

CAUTION:
When dismounting, make sure there is no person in between the mower
and the tractor.
To dismount the mower from the tractor:
turn cutterbar's drive off,

place the mower on an even, paved ground, then lower and inspect, if the mower is properly

secured against falling,
secure the tractor against its free runaway,

turn the tractor's engine off and take ignition key off,

dismount the PTO shaft and place it on a PTO shaft holder, that is standard-delivered with the

mower,
release the triangle's hook,

detach tractor's upper link and lower strands from mower's linkage,

carefully drive away with the tractor.


6. MOUNTING AND ADJUSTMENTS

6.1.

Mounting and timing of the knives

The scheme of mounting the knives and their placement in each type of the mowers is shown
in Fig. 18 and Fig. 19.
K2BF 210
Kosiarka dwubębnowa Z 010/8
CAUTION:
Use SaMASZ knives only.
CAUTION:
The cutting edges of the new knives should be directed towards ground.
Operator's manual
K4BF 300
Kosiarka czterobębnowa Z 007
Fig. 18. Timing of the knives on the mowing saucers
Front drum mower
K2BF 210; K4BF 265; K4BF 300
K4BF 265
- 22 -