Defects And Their Repairs; Disassembly; Scrapping - SaMASZ K2BF 210 Operator's Manual

9. DEFECTS AND THEIR REPAIRS

CAUTION:
Before disassembly the mower should be disconnected from the tractor.
9.1.

Disassembly

Prior to any repair works, potentially related to admitting it for use, the mower should be
cleaned thoroughly and any grass, dirt or mud be removed.
Carefully check nuts and bolts for adequate torque and the pins for wear.
Worn or damaged screws, pegs, v-belts, pins should be replaced for new ones.
Once the machine is repaired perform the following:
Make sure that all elements are installed properly,

Install the removed guards,

Check that all screws and nuts are tightened,

Once all the guards are installed, perform a warm-up start to make sure the repaired machine

operates properly.
9.2.

Scrapping

If the mower cannot be repaired anymore, it should be withdrawn from use.
For this purpose oil from the frame gearbox should be drained and thoroughly clean any
excess oil with cleaning agent, take v-belts and parts made of plastic off. These should be used
further on or delivered to a proper waste treatment company.
Upon completing the required activities machine should be sold to breaker's yard.
CAUTION:
When dismounting the machine pay particular attention to and additional
dangers, as crushing, cutting, wounding, concussion and abrasion. Use
proper tools and personal protective equipment: protective gloves, clothing
and footwear, eye wear, etc. Pay attention so that the machine works
efficiently, and thus it is required to secure the machine with supports.
Operator's manual
Front drum mower
K2BF 210; K4BF 265; K4BF 300
- 29 -