Disassembly And Withdrawal From Use; Scrapping; Restarting The Machine After Repairs Or Longer Storing Periods; Demontage And Withdrawal From Use - SaMASZ KDC 260 Operator's Manual

9. DISASSEMBLY AND WITHDRAWAL FROM USE

9.1.

Scrapping

If the mower cannot be repaired anymore, it should be withdrawn from use
To do so, oil from intersecting axis gear and cutterbar should be drained and delivered to a
proper waste treatment company. Clean the mower parts, dismantle and dispose properly of all
plastic parts. After that, the mower can be scrapped.
NOTE:
Prior to commencing repair works the mower should be disconnected from
the tractor.
NOTE:
It is forbidden to make any repairs under farming machine, or its individual
components, which is lifted and unprotected against a free fall.
9.1.1.

Restarting the machine after repairs or longer storing periods

Make sure that all nuts and screws are tightened with correct torque.
Make sure that all guards are installed in place.
As the storing period is over lubricate the whole machine.
Check pressure in tires.
9.2.

Demontage and withdrawal from use

If the mower cannot be repaired anymore, it should be withdrawn from use. For this purpose
oil from intersecting axis gear and the 3-point linkage frame should be drained and thoroughly clean
any excess oil with cleaning agent, take v-belts and any elements made of plastic. These should be
delivered to a proper waste treatment company.
Remaining metal parts should be sold to breaker's yard.
NOTE:
When dismounting the machine pay particular attention to and additional
dangers, as crushing, cutting, wounding, concussion and abrasion. Special
protective equipment must be used: gloves, protective clothing, glasses etc.
Pay attention not to allow the machine lose its stability and therefore protect
it with
Operator's manual
supports.
Trailed disc mowers
- 45 -
KDC
.