Schedule - Graco Therm-O-Flow 200 Instructions - Parts Manual

Schedule

Press the on the ADM from any run screen to go
to the Main Menu Screens.
Press the soft key on the ADM to go to the Sched-
ule screen.
The Schedule function allows the user to specify times
when the system will automatically turn ON and OFF the
heaters and Pump.
Table 1: Schedule Screen Color Identification
Color
Green
Yellow
Red
Gray
3A8005A
Description
System on
Setback
System off
Disabled
Set Schedule Times
Times are set using a 24-hour clock. Several on and off
times can be set each day.
1. On the Schedule screen (in the Setup screens), set
the ON times for each day of the week
2. Set the OFF times for each day of the week.
3. Set the setback times for each day of the week.
Enable Schedule Function
To enable the Schedule feature, set the external control
to Scheduler. See System Setup Screen on page 31.
The Schedule function is automatically enabled when
values are entered in the Schedule screen. To disable a
scheduled event, navigate to the event and press the
soft key.
The event will appear gray on the screen when it is dis-
abled. To re-enable an event, navigate to the event and
press the soft key.
The event will appear red (system off), yellow (system
setback), or green (system on). If no events are needed,
turn the Disconnect Switch (T) OFF to prevent system
from automatically enabling and disabling the heaters.
Use the Schedule Function
At the end of the work day, leave the Disconnect Switch
(T) ON. As long as the system remains active, the
Schedule function will automatically enable and disable
the heaters and Pump at the specified times.
NOTE: The Schedule feature will only work if the
integration control is disabled.
Operation
49