Graco Therm-O-Flow 200 Instructions - Parts Manual page 58

Troubleshooting
Error Location Type
CCG_ Gateway Alarm
CCT_ AMZ Alarm
CCV_ AMZ Alarm
EUH_ AMZ Record
Only
EAUX ADM Advisory
EBUX ADM Advisory
EBH_ AMZ Record
Only
EC0X ADM Record
Only
EDF_ AMZ Record
Only
EDS_ AMZ Record
Only
58
Error Name Error Description
Fieldbus No communication
Comm. Error with the fieldbus
U_
Duplicate Multiple AMZ MZLP4s
Module U_D_ using same module ID
Duplicate Multiple AMZ DBs
Module U_D_ using same module ID
Pump Inactive Automatically turn the
Timeout U_ heat to setback after
the designated amount
of time the pump has
been inactive. If the
pump has been
inactive for two times
the designated amount
of time, the heat will be
turned off.
Download to Information is currently
USB In being downloaded to
Process USB
Download to Download to USB is
USB complete
Complete
Heat Off U_ Unit Heat was turned
off
Setup Values A setting in the setup
Changed screen was changed
Heat is Unit Heat is in
Temperature temperature soaking
Soaking U_ state
Heat in Unit Heat is in setback
Setback U_ state
Cause
The gateway Restore
lost communications.
communication
with the unit
controller
Two or more Turn dial on AMZ to an
AMZ MZLP4s non used module ID
have the same
module ID
Two or more Turn dial on AMZ to an
AMZ DBs have non used module ID
the same
module ID
All zones on No action necessary.
heat module
were
successfully
turned off
Download to No action necessary.
USB initiated Self-clearing.
All requested No action necessary.
information has Self-clearing.
finished
downloading to
USB
Unit heat was No action necessary.
successfully
turned off
A setting in the No action necessary if
setup screens changes were desired.
was changed
Unit heat went No action necessary.
into
temperature
soaking
Unit heat went No action necessary.
into setback
Solution
3A8005A