Important When Mounting Release Cylinder And Tine - HE-VA Combi-Disc 4,5 m Operating Instructions Manual
Hide thumbs
Also See for Combi-Disc 4,5 m:
Table of Contents
Advertisement
UK
Important when mounting release cylinder and tine
The bolt in the hydraulic cylinder fork end must be tightend with sufficient tension, to make
bushing nr. 654000113 fixed in the open end of cylinder. The bushing must not spin around the bolt
when the tine gets released by the stone protection of a solid rock.
Combi-Disc 4,5 – 5,5m Part 1
Important to tightend this bolt, when
replacing of tine or cylinder, to 1000 Nm
20
20-01-2021
Bushing no. 654000113
Back to the table of contents
Advertisement
Table of Contents
