Summary of Contents for HE-VA Combi-Tiller 3.0 m rigid
Page 1
4.0 m / 5.0 m (hydraulic) Important: Before using the machine, please study the Operating Instructions thoroughly to ensure that you are familiar with the safety instructions. N. A. Christensensvej 34 DK-7900 Nykøbing Mors Tel: +45 9772 4288 Fax:+45 9772 2112 www.he-va.com...
EC DECLARATION OF CONFORMITY in accordance with the EU Machinery Directive 2006/42/EC applicable as from December 29 2009: HE-VA ApS N. A. Christensensvej 34, DK-7900 Nykøbing Mors hereby confirms that the following machine has been manufactured in accordance with the Council Directive 2006/42/EC.
Combi-Tiller 03/09 -2015 Delivery check Upon delivery to the dealer/supplier as well as to the customer, check the Combi-Tiller for possible damages. Machine Description Technical specifications 2.5 m 3.0 m 3.5 m 4.0 m 4.0 m 5.0 m hydr hydr. Working width ......
Combi-Tiller 03/09 -2015 Safety instructions for Combi-Tiller Do not start-up the machine if there are persons in exposed positions* within a hazardous area**. When persons are in exposed positions (e.g. in connection with adjustment, maintenance, attachment and uncoupling), the following conditions must be observed: The machine must be lowered to firm ground.
Combi-Tiller 03/09 -2015 Safety and Instructions on Hydraulics It is advisable to label the attachment parts at hydraulic connections between the tractor and the tool in order to eliminate incorrect operation! When checking for hydraulic leaks, use suitable safety wear (eye protectors, gloves, etc.) High-pressure hydraulic oil may penetrate the skin and cause dangerous injuries.
Combi-Tiller 03/09 -2015 Labels on the machine You will find several labels on your machine containing safety and practical instructions as regards the correct application of the machine. Please study the instructions and point out to the user the importance of the labels as well as the safety instructions in the Operating Instructions.
In case of indication that the machine is damaged, it is to be reinforced at once. HE-VA ApS disclaims every responsibility if the machine is of another make, or if the Combi-Tiller is mounted in a combination without any preceding qualified guidance.
Combi-Tiller 03/09 -2015 Setting and adjustment Replacement of wearing point Before working with the machine’s wearing points, the machine is to be fastened. This can be performed by trestles under the main frame or by a support of the roller. 2.
Combi-Tiller 03/09 -2015 Depth adjustment The Combi-Tiller can operate from 0 cm to max. 30 cm depth. If the Combi-Tiller is used solo or acts as a draw unit for a trailed machine, the working depth can be varied with the tractor’s lift. If the Combi-Tiller is in combination with other machines, the depth adjustment is controlled by moving each single tine down to the required working depth and then lock it with the pin.
Combi-Tiller 03/09 -2015 Spare Parts List Rigid frame Pos. Item no. Designation 2,5 m 3.0 m 3,5m 4.0 m 645100002 Frame 2.5 m 645100001 Frame 3.0 m 645100127 Frame 3,5 m 645100067 Frame 4.0 m 645100045 Tine f/mechanical release system 69525063B Pin for tine 690134004...
Tube-support double Ø14/Ø14 690210211 Top plate for tube-support double 690103054 Bolt M8x40 Lift mounted with coupling for trailed machine As an example the machine is mounted in the tractor linkage and tows a trailed HE-VA Disc-Roller. Number Number Pos. Item no. Designation Rigid Hydr.
Combi-Tiller 03/09 -2015 Lift mounted with three point mounted machine As an example the machine is mounted in the tractor linkages and following mounted with a lift mounted HE-VA Disc-Roller in the Combi-Tiller’s three point suspension. Number Number Pos. Item no.
Combi-Tiller 03/09 -2015 Module-mounted As an example the machine is mounted between drawbar and a trailed HE-VA Disc-Roller. Number Number Pos. Item no. Designation Rigid Hydr. foldable 690302005 Top link Cat.III - 36x3 (570-790mm) 690201205 Hydr. hose 1130 mm 3/8" st/st 690201032 Hydr.
Combi-Tiller 03/09 -2015 Delivery check Upon delivery to the dealer/supplier as well as to the customer, check the Combi-Tiller for possible damages. Machine Description Technical specifications 2,5 m 3,0 m 3,5 m 4,0 m Working width Transport width Power 60 – 80 90 –...
Page 22
Combi-Tiller 03/09 -2015 Pos. Item no. Designation per tine 645100121 Short Bracket 645100120 Long Bracket 645100119 Bracket 645100073 Tine 690130169 Pin Ø12x50, galvanized ( for security) 69525063B Pin for tine 690134008 Ring pin 690103324 Bolt M18x100 10.9 690117015 Facet plate Ø18 690113016 Self-locking nut M18 690103190...
Page 23
Combi-Tiller 03/09 -2015 Support leg By linking with a fully mounted Disc-Roller Pos. Varenr Betegnelse 630915258 Support leg 630915261 Support leg bracket 69516094A Pin Ø16 690103284 Bolt M16x100 8.8 690110106 U-bolt M16x200x100x200 690117013 Facet plate Ø16 690134008 Self locking nut M16 690133005 Hairpin Complete support leg ( Pos 1 –...
Page 24
The design is subject to modification without notice.