Danfoss VLT AQUA Drive FC 202 Instruction Manual page 86

Specifications
See section on special conditions
Control card performance
Scan interval
Control card, USB serial communication
USB standard
USB plug
CAUTION
Connection to PC is carried out via a standard host/device USB cable.
The USB connection is galvanically isolated from the supply voltage (PELV) and other high-voltage terminals.
The USB connection is not galvanically isolated from ground protection. Only use an isolated laptop/PC as the connection to
the USB connector on an VLT AQUA Drive or an isolated USB cable/drive.
10 10
10-16
®
VLT AQUA Drive
Instruction Manual
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6
®
MG20M922 - VLT is a registered Danfoss trademark
5 ms
1.1 (Full speed)
USB type B "device" plug