Danfoss VLT AQUA Drive FC 202 Instruction Manual page 2

Safety
CAUTION
Indicates a situation that may result in equipment or
property damage-only accidents.
NOTE!
Indicates highlighted information that should be observed
in order to avoid mistakes or operate equipment at less
than optimal performance.
Approvals
NOTE!
Imposed limitations on the output frequency
(due to export control regulations):
From software version 1.99, the output frequency of the
adjustable frequency drive is limited to 590 Hz. Software
versions 1x.xx also limit the maximum output frequency to
590 Hz, but these versions cannot be flashed, i.e., neither
downgraded nor upgraded.
®
VLT AQUA Drive
Instruction Manual
®
MG20M922 - VLT is a registered Danfoss trademark