Required Tools; Safety Precautions - Christie Solaria One Retrofitting Manual

Required tools

The following tools are required to complete the installation.
• Electrostatic discharge mat
• Grounded electrostatic discharge wrist strap
®
• #1 Phillips screwdriver
®
• #2 Phillips screwdriver
• 14 mm wrench
• Ratchet with the following nut drivers:
• 3/16 nut driver
• 5/8 nut driver
• 7/32 nut driver
• 2.5 mm hex driver
• Pliers

Safety precautions

To prevent personal injury and to protect the product from damage, review these important safety
precautions.
Warning! If not avoided, the following could result in death or serious injury.
• SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
Installing the Christie Solaria One IMS3000 IMB Faceplate Kit Instruction Sheet
020-103421-02 Rev. 1 (11-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Retrofitting the Solaria One projector with a Dolby IMS3000 IMB
2