Christie Solaria One Retrofitting Manual page 8

17. Carefully separate the PIBS1 board from the faceplate. Set the board aside.
18. Using a 7/32 nut driver, remove the four nuts securing the PIB faceplate board to the faceplate
and remove the PIB faceplate board and four spacers. Set the nuts, board, and spacers aside.
19. Using a #1 Phillips
Set the handles and screws aside.
20. Remove the EMI gasket and set it aside.
Installing the Christie Solaria One IMS3000 IMB Faceplate Kit Instruction Sheet
020-103421-02 Rev. 1 (11-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Retrofitting the Solaria One projector with a Dolby IMS3000 IMB
®
screwdriver, remove the four screws securing the handles to the faceplate.
8