5. Secure the PIB faceplate board to the faceplate using the four nuts set aside in step 18 of the
disassembly procedure. Torque the nuts to 10 in-lb.
6. Install the EMI gasket provided with the Dolby IMS3000 to the faceplate, as shown.
Installing the Christie Solaria One IMS3000 IMB Faceplate Kit Instruction Sheet
020-103421-02 Rev. 1 (11-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
Retrofitting the Solaria One projector with a Dolby IMS3000 IMB
10