Christie Solaria One Retrofitting Manual page 13

Retrofitting with adolby ims3000 imb

Hide thumbs Also See for Solaria One:

Table of Contents

16. Using the three HDBNC nuts and six #1 Phillips screws provided with the IMS3000 kit, secure

the IMS3000 board to the faceplate.

17. Using the handles and #1 Phillips

install the handles onto the faceplate. Torque the screws to 6 in-lb.

18. Using the eight screws removed in step 4 of the disassembly process, secure the card cage

faceplate to the card cage. Torque the screws to 10 in-lb.

19. Apply the void warranty label as shown.

20. Place the Christie IMB (without the faceplate) into the provided electrostatic discharge bag.

21. Place the bag into the box, as shown, and cover with the top foam lid.

Installing the Christie Solaria One IMS3000 IMB Faceplate Kit Instruction Sheet

020-103421-02 Rev. 1 (11-2020)

Retrofitting the Solaria One projector with a Dolby IMS3000 IMB

screws removed in step 19 of the disassembly procedure,

Table of Contents

Solaria one+