Kostal PIKO 36 EPC Operating Manual page 96

System monitoring
1 2 3
Manually configuring the network
As the standard default setting, the option "Auto IP/
DHCP" and "Router/Gateway" is activated. This means
that the inverter obtains its IP address from a DHCP
server or automatically generates an IP address and
establishes the connection to the Internet through an
external router/gateway.
In the following case, the network setting must be
entered manually:
No DHCP server to generate an IP address
n
A DHCP server can be, for example, an Internet router
(cable/DSL). A DHCP server (Dynamic Host Configura-
tion Protocol) is a service that administers and distributes
the IP addresses and the network configuration in a
network.
If the IP address has to be set manually, this can be
done in the inverter menu below or above the Webserver
under "Communication".
© 2017 KOSTAL Solar Electric GmbH
4 5 6 6 7 8 9 10 11
96