Maintenance
1
2
3
Replacing LAN overvoltage protection
Release the cables from the overvoltage protection
1.
modules and remove the modules.
Insert the new modules into the fitted mount. Plug
2.
the communication cables into the corresponding
module.
Fig. 64: LAN overvoltage protection
Installation position for overvoltage protection
1
Ethernet connections 2 x
© 2017 KOSTAL Solar Electric GmbH
4
5
6
7
PE
8
8
9
10
11
INFO
Note the manufacturer's installation
and assembly instructions for the
overvoltage protection.
The following types are approved for
the overvoltage protection and can
be ordered from the KOSTAL online
shop:
Ethernet connection (LAN):
2 x CLD RJ45B (10324083)
Problems in communication with the
inverter indicate defective modules.
The inverter does not monitor the
modules.
124