Kostal PIKO 36 EPC Operating Manual page 41

Installation
1 2 3 3
Inserting AC/DC overvoltage protection
Insert overvoltage protection on the AC and/or DC
1.
side.
The overvoltage protection is coded (by means of a
pin on the base and module base) and cannot be
inserted the other way round. Note the coding at the
plug-in positions.
Fig. 26: Installation positions for DC overvoltage protection
Overvoltage protection for DC side 4 x
1
Overvoltage protection for DC side 1 x
2
Fig. 27: Installation positions for AC overvoltage protection
Overvoltage protection for AC side 3 x
1
Overvoltage protection installed
H
© 2017 KOSTAL Solar Electric GmbH
4 5 6 7
PE
8 9 10 11
INFO
Note the manufacturer's installation
and assembly instructions for the
overvoltage protection.
The following types are approved for
the overvoltage protection and can
be ordered from the KOSTAL online
shop:
DC side:
4 x MOD PV SCI 600 DG (10334450)
1 x MOD PV 600 (10334451)
AC side:
3 x MOD 275 (10324116)
41