Kostal PIKO 36 EPC Operating Manual page 45

Installation
1 2 3 3
If two PV strings are jointly connected to one DC
n
input using a Y-splitter, these strings and the parallel
string (e.g. DC1 and DC2) must also be protected
using separate string fuses.
Please ensure that the maximum permitted DC idling
n
voltage is not exceeded.
Record and keep the measured values.
Provide these measured values in the event of a
n
complaint.
Failure to do so will make any manufacturer's warranty,
guarantee or liability null and void unless you can prove
that the damage was not due to non-compliance.
© 2017 KOSTAL Solar Electric GmbH
4 5 6 7 8 9 10 11
45