Kostal PIKO 36 EPC Operating Manual page 43

Installation
1 2 3 3
Inserting RS485 overvoltage protection
Install overvoltage protection of communication
1.
cables for RS485. Connect the module to the
retaining plate intended for this purpose. The module
is designed for fastening top-hat rails. Plug the
communication cables into the module and connect
on to the communication board.
Fig. 30: RS485 overvoltage protection in the inverter
Installation position for overvoltage protection
1
RS485 connections 1 x
Overvoltage protection installed
H
© 2017 KOSTAL Solar Electric GmbH
4 5 6 7
PE
8 9 10 11
INFO
Note the manufacturer's installation
and assembly instructions for the
overvoltage protection.
The following types are approved for
the overvoltage protection and can
be ordered from the KOSTAL online
shop:
RS485 connection:
1 x DCO SD2 ME (RS485) (10330764)
43