Kostal PIKO 36 EPC Operating Manual page 117

Maintenance
1 2 3
If the update was successful, confirm this on the
6.
inverter with the "ENTER" key.
If the update was unsuccessful, carry it out again or
contact the Service team.
Following successful installation of the software (UI),
7.
you can retrieve the current version on the inverter.
Do this by going to:
Settings > Device information > SW/HW release
Check the time on the inverter and correct this if
8.
necessary.
Do this by going to:
Settings > Basic settings > Date/time.
© 2017 KOSTAL Solar Electric GmbH
4 5 6 7 8 8 9 10 11
INFO
Following a successful update, the
inverter automatically returns to feed-
in mode.
117